Dual Digital Delay
DIG unearths the true soul of digital delay and doubles it—two simultaneous, integrated delays with the captivating rack delay voicings from the 1980s and today, for incredible expressive potential.
Effortlessly create your own world of intricate and synchronized echoes, along with hypnotic and atmospheric repeats that blur the line between delay and reverb. Stretch your sonic horizons with five musically satisfying rhythmic subdivisions and three dual delay routing options. Go from syncopated, pulsating delay patterns, to evocative, spaced-out echo trails all in a compact, pedalboard-friendly format.
Rack to the Future.
Rack-mount digital delays of the ’80s ushered in a new era of audio effects. The innovative electronic designs generated the cleanest delays yet to be heard, but also created their own special and intriguing sonic characteristics. Thirty-plus years later, these sounds remain as distinctive and inspiring as ever.
Our thorough investigation of digital delay technology reveals the unique personalities that these delays possess. Delve into DIG’s three digital delay voicings: the early ’80s adaptive delta modulation mode, the mid-’80s 12 bit pulse code modulation mode, and the modern high-resolution 24/96 mode.
Multiply these distinct voicings by two and get DIG—your perfect dual delay ally.
Two Simultaneous, Integrated Delays.
DELAY 1 – The Master Delay.
Free-running delay time allows you to easily dial in delays from 20ms to 1.6s with the Time knob or Tap Tempo switch. Longer delay times lend themselves to more ambient soundscapes while doubling and slapback effects can be achieved at short delay times.
DELAY 2 – The Companion Delay.
Set the ratio between the two delays with one of five rhythmic subdivisions: triplet, eighth note, dotted eighth note, dotted quarter note, and the golden ratio. Don’t want synchronization? Engage Free Mode to disable subdivisions and allow Delay 2 to be its own independent, free-running delay. Dial in short delay times for chorus/flange sounds to run alongside Delay 1.
-Time controls delay time for Delay 1, and acts as a master time control for both delays.
–Mod sets the amount of modulation added to the delay lines. Select from Off, Light, or Deep.
–Type allows you to choose from three delay conversion process voicings.
24/96 – Modern, pure, high-resolution delay paired with subtle dynamics processing.
adm – Early 80s adaptive delta modulation process, providing snappy, percussive delays reminiscent of some of the first available digital rack units.
12 bit – Mid 80s 12 bit pulse code modulation conversion method yields slightly darker and warmer delays.
–Mix controls the wet/dry mix for Delay 1. Full clockwise is 100% wet.
-Time 2 sets the rhythmic subdivision between Delay 1 and Delay 2. Select triplet, eighth, golden ratio, dotted eighth, or dotted quarter.
-Repeats sets the amount of repeats for both delays.
-Mix 2 controls the wet/dry mix for Delay 2. Full clockwise is 100% wet.
-The Tap footswitch allows you to tap quarter notes to set the delay time. The Tap LED will flash to indicate the tempo. Press-and-hold to generate circular repeats.
-The Bypass footswitch engages and bypasses the effect.
-Delay 1 Subdivision sets a Tap Tempo subdivision for Delay 1. Turn left for Dotted Eighth note, center for Quarter note, right for Half note. Quarter note is default operation.
–Sync/Free Mode enables and disables time sync and subdivisions.
Right side of knob engages Free Mode. Disables time sync and subdivisions between Delay 1 and Delay 2. Gives Time 2 knob a full delay range from 20ms to 1.6s.
Left side of knob engages Sync Mode. Enables time sync and subdivisions between Delay 1 and
Delay 2. Sync Mode is default operation.
–Delay 2 Repeats sets the number of Delay 2 Repeats. Turn fully right to Track Repeats which ties Delay 1 and Delay 2 together. Track Repeats is default operation.
–Filter sets a feedback filter response. Turn left for High Cut, center for Flatresponse, right for Low Cut. Flat response is default operation.
–Config alters the delay signal routing. Turn left for Series, center for Ping Pong, or right for Parallelconfiguration. Series is default operation.
Series, Parallel, Ping Pong
Set up your two delays in one of three configurations. Series is like setting up pedals in a chain on your board, feeding Delay 2 into Delay 1. Parallel will orient your delay lines so that they remain independent—Delay 1 in the left channel and Delay 2 in the right channel. With Ping Pong, each delay acts as a ping pong delay, interacting together when both Mix knobs are turned up.
Don’t want your delays to be synchronized? Free Mode disables time sync and subdivisions between Delay 1 and Delay 2, giving the Time 2 knob a full delay range from 20ms to 1.6s.
Holding down the TAP footswitch enables circular repeats, where both delay lines maintain a static volume and repeat continuously until the TAP footswitch is disengaged. At this point, all previous settings will be restored.
Input allows for the connection of either an expression pedal, external tap, or Favorite switch. Plug in an expression pedal and control any one knob with your foot. Plug in an external tap pedal to remotely tap in your tempos. Plug in a Favorite switch to save and recall a favorite preset.
- Two simultaneous, integrated delays, with unique digital rack delay voicings
- Five dual delay adjustment and tone shaping knobs: Time, Time 2, Mix, Mix 2, Repeats
- One modern and two classic digital delay voicings: 24/96, adm, 12 bit
- Five rhythmic subdivisions: Triplet, Eighth, Golden Ratio, Dotted Eighth, Dotted Quarter
- Three choices for delay line modulation: Off, Light, Deep
- Five “hidden” knobs for deep dual delay control: Delay 1 Subdivision, Sync/Free Mode, Filter, Config, Delay 2 Repeats
- Selectable Free Mode disables subdivisions and synchronization
- Press and hold Circular Repeats effect
- 20ms – 1.6s delay range (40ms – 3.2s with Half Note Delay 1 Subdivision)
Ins, Outs and Switches
- High impedance mono input, with selectable TRS stereo input
- Stereo output
- Three signal routing configurations: Series, Parallel, Ping Pong
- Tap tempo and Bypass footswitches
- Expression pedal input allows the connection of either an expression pedal (for selectable control over any knob parameter), external tap pedal (for remote control of tempo), or Favorite switch (to save a Favorite preset)
- Super low noise, high performance 24-bit 96kHz A/D and D/A converters
- 115db typical signal to noise
- Analog dry path for a zero latency dry signal that is never converted to digital
- +8dBu maximum input level easily handles instrument and line signals
- 20Hz to 20kHz frequency response
- Premium analog front end and output section
- Super high performance SHARC DSP in a compact form factor
- 32-bit floating point processing